Items where Subject is "Engineering"

Group by: Creators | Item Type
Jump to: . | A | B | F | G | H | K | L | M | N | O | P | R | S | T | W | Y
Number of items at this level: 31.

.

., Balamuralikrishnan R. and Mohammedali, Ibrahim Shabbir (2025) A Comparative Study on the Design of a Two-Story Car Showroom Using Pre-Engineered Buildings (PEBs) in Accordance with British Standards and Euro Codes. In: Engineering Research: Perspectives on Recent Advances Vol. 5. BP International, pp. 98-117. ISBN 978-93-49473-43-0

A

Abdurrosyid, Jaji and Wibowo, Gurawan Jati (2025) Optimizing Scour Protection in Downstream Stilling Basins: Insights from USBR-Type Weirs. In: Engineering Research: Perspectives on Recent Advances Vol. 5. BP International, pp. 69-97. ISBN 978-93-49473-43-0

Abubakar, Jibrin and Abdullahi, Mohammed and Aguwa, James Isiwu and Abbas, Bala Alhaji and Kolo, Daniel Ndakuta (2025) Empirical Relationship between Compressive, Flexural and Splitting Tensile Strengths of Concrete Containing Kuta Gravel as Coarse Aggregate. Journal of Engineering Research and Reports, 27 (1). pp. 209-218. ISSN 2582-2926

Agbadede, Roupa and Kainga, Biweri and Allison, Isaiah (2024) Comparative Analysis of the Effectiveness of Steam versus Water Injection Techniques for NOx Reduction in an Intercooled Combined Cycle Gas Turbine. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 87-97. ISBN 978-81-983173-0-8

Anvarovich, Mirzakhodjaev Bakhtiyar and Anvar, Mirzakhodjaev and Kamilyevich, Bazarov Rustam and Tangatarovna, Tajenova Arzigul and Bahadirovich, Radzhabov Ismoil (2024) A Device for Separating Silkworm Eggs by Color (Sex) Based on Computer Vision. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 70-86. ISBN 978-81-983173-0-8

B

Bég, Osman Anwar and Bakier, Ahmed and Prasad, Ramachandra and Ghosh, Swapan Kumar (2011) Numerical Modelling of Non-similar Mixed Convection Heat and Species Transfer along an Inclined Solar Energy Collector Surface with Cross Diffusion Effects. World Journal of Mechanics, 01 (04). pp. 185-196. ISSN 2160-049X

F

Folio, Freddie B. and Guingab, Roy B. and Gomez, Frederick Ray I. and Pulido, Jonathan C. (2021) Resolution of Low IMC on Multi-Stacked Dice Device with Different Bond Pads. Journal of Engineering Research and Reports, 20 (9). pp. 13-17. ISSN 2582-2926

G

Gabriel-Wettey, Francis Kwesi Nsakwa and Appiadu-Boakye, Kennedy and Anewuoh, Firmin (2021) Impact of Curing Methods on the Porosity and Compressive Strength of Concrete. Journal of Engineering Research and Reports, 20 (9). pp. 18-30. ISSN 2582-2926

H

Habeebullah, Badr and Jassim, Rahim and Turkmen, Nedim and Bokhary, Ahmad and Alhazmy, Majed (2025) Economic Feasibility of Thermal Energy Storage Systems in Saudi Arabian Schools: A Case Study. In: Engineering Research: Perspectives on Recent Advances Vol. 3. BP International, pp. 111-132. ISBN 978-93-49238-50-3

K

Kriger, Vadim. G. and Kalenskii, Alexander. V. and Zvekov, Alexander A. and Anan'eva, Marina V. and Grishaeva, Elena A. and Zykov, Igor U. (2011) Determination of the Onset of Mechanical Destruction of Silver Azide Crystals Initiated by a Laser Pulse. World Journal of Mechanics, 01 (04). pp. 203-207. ISSN 2160-049X

L

Lanzagorta, José Luis and Martín-Meizoso, Antonio (2011) 3-Point Bending of Bars and Rods Made of Materials Obeying a Ramberg-Osgood Criterion. World Journal of Mechanics, 01 (03). pp. 71-77. ISSN 2160-049X

M

Meriem, Sediri and Salah, Hanini (2024) Study of Dynamic Adsorption from Wastewater into Mineral Activated Carbon Using Artificial Neural Network. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 145-155. ISBN 978-81-983173-0-8

N

Narahari, Marneni and Bég, Osman Anwar and Ghosh, Swapan Kumar (2011) Mathematical Modelling of Mass Transfer and Free Convection Current Effects on Unsteady Viscous Flow with Ramped Wall Temperature. World Journal of Mechanics, 01 (04). pp. 176-184. ISSN 2160-049X

Narender, B Raja and Kumar, S Narasimha and Hadya, B (2025) Impact of Fuel Injection Pressure and Timing on the Performance and Emissions of a Low Heat Rejection CI Engine with Fish Oil Methyl Ester, DEE and Butanol Blend. Journal of Engineering Research and Reports, 27 (1). pp. 59-75. ISSN 2582-2926

Narvadez, Raymond Albert A. and Gomez, Frederick Ray I. and Moreno, Anthony R. and Jr., Edwin M. Graycochea (2021) Assembly Wirebond Process Solution for Mitigating Leadframe Bouncing on Multi-Die QFN Device. Journal of Engineering Research and Reports, 20 (9). pp. 7-12. ISSN 2582-2926

Nene, Sinqobile Wiseman (2024) Integration of Capacitor Coupled Substation and Controllable Network Transformer for Bidirectional Power Flow and Grid Control. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 116-144. ISBN 978-81-983173-0-8

Njama-Abang, Osowomuabe (2025) Machine Learning in Construction: A Systematic Review with a Focus on Nigeria. Journal of Engineering Research and Reports, 27 (2). pp. 89-103. ISSN 2582-2926

O

Olutimehin, Abayomi Titilola and Ajayi, Adekunbi Justina and Metibemu, Olufunke Cynthia and Balogun, Adebayo Yusuf and Oladoyinbo, Tunbosun Oyewale and Olaniyi, Oluwaseun Oladeji (2025) Adversarial Threats to AI-Driven Systems: Exploring the Attack Surface of Machine Learning Models and Countermeasures. Journal of Engineering Research and Reports, 27 (2). pp. 341-362. ISSN 2582-2926

P

Purece, Cristian (2024) Comparison of Discharge Measurement Techniques for Small-scale Hydropower Efficiency. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 156-173. ISBN 978-81-983173-0-8

R

Rodger, Murungi and Mohammedseid, Awel (2025) Fatigue Life Prediction of Wheels for CRH2 High-speed Train Due to Flexible Tracks. Journal of Engineering Research and Reports, 27 (2). pp. 157-168. ISSN 2582-2926

S

Sarafian, Haiduke (2011) Transverse Standing Waves in a Nonuniform Line and their Empirical Verifications. World Journal of Mechanics, 01 (04). pp. 197-202. ISSN 2160-049X

Shukla, Darshni and Panchal, Brijal and Nema, Pragya (2024) Enhanced Performance of Induction Motors Using a 3-Level H-Bridge Space Vector PWM Inverter. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 98-115. ISBN 978-81-983173-0-8

Singh, Vedant (2025) AI-Powered Assistive Technologies for People with Disabilities: Developing AI Solutions that Aid Individuals with Various Disabilities in Daily Tasks. Journal of Engineering Research and Reports, 27 (2). pp. 292-309. ISSN 2582-2926

Singh, Vedant (2025) Data Augmentation Techniques Using Generative Adversarial Networks: Employing GANs to Create Synthetic Data for Enhancing Machine Learning Model Training. Journal of Engineering Research and Reports, 27 (2). pp. 228-248. ISSN 2582-2926

Srebrenkoska, Sara and Dukovski, Vladimir (2024) An Analysis of Defects IN Automated Fiber Placement (AFP) Technology. In: Current Approaches in Engineering Research and Technology Vol. 10. BP International, pp. 174-184. ISBN 978-81-983173-0-8

Stanasel, Iulian and Stanasel, Caius (2025) Automating the Manufacturing Process: Feature Recognition and CNC Programming with Siemens NX. In: Engineering Research: Perspectives on Recent Advances Vol. 3. BP International, pp. 90-110. ISBN 978-93-49238-50-3

Suhaimi, Nur Athirah and Singh, Baljit and Remeli, Muhammad Fairuz (2025) Experimental Study on Heat Recovery System of Exhaust Gases in an Internal Combustion Engine Using Thermoelectric Generators. In: Engineering Research: Perspectives on Recent Advances Vol. 2. BP International, pp. 21-30. ISBN 978-93-48859-48-8

T

Toderas, Mihaela and Danciu, Ciprian (2025) An Investigation into the Creep Behavior of Rock Salt from Slanic Prahova. In: Engineering Research: Perspectives on Recent Advances Vol. 2. BP International, pp. 31-82. ISBN 978-93-48859-48-8

Tunca, Bilgehan and Ince, Burak and Deniz, Dilek (2025) Advancements in Refining Techniques for Improving Liquid Metal Quality in Aluminum Alloys. In: Engineering Research: Perspectives on Recent Advances Vol. 4. BP International, pp. 157-176. ISBN 978-93-49238-49-7

W

Wang, Xiaoqi and Liu, Guanfeng (2025) Effect of Using Plant Fiber on The Properties of Concrete. Journal of Engineering Research and Reports, 27 (2). pp. 46-49. ISSN 2582-2926

Y

Yan, Hongshuo (2025) Contact Stress Analysis of the Slewing Bearing of Truck Cranes. Journal of Engineering Research and Reports, 27 (2). pp. 82-88. ISSN 2582-2926

This list was generated on Wed Mar 26 07:37:37 2025 UTC.